Around & Around | 1976-07-16 | Grateful Dead

1:27:52
Taper:
See info file
Transferrer:
Dan Haugh
SHNID:
gd1976-07-16.mtx.dts.dan.30698.flac16
Source:
DTS-Audio-CD 5.1 Mix Soundboard/Aud Matrix
Lineage:
See info file
Taper Notes:
View Notes---------------------------------------------------------

Source Info

SBD
SBD: Master Reel -> Master Dat (44.1k)

AUD
FOBalcony: MAC > DAT > CD
Recorded by Bob Menke using Sony ECM-280 mics > 
Sony TC-152 from front of balcony

---------------------------------------------------------

Tech Notes

SHNs were decoded to wave and SF 6.0 was used to reassemble 
the tracks back to 1 long wave.  Cool Edit Pro 2.0 was used 
to align & synch both of the sources.  CEP2.0 used to adjust 
the volume for the AUD source, center and LFE channels.  
Surcode CD Pro DTS was used to encode to DTS.  
- Mixed by dan@am-dig.com
- SHN conversion 13-OCT-2004
- Remix FLAC conversion 19-JAN-2005
- Artwork by dan@am-dig.com 300dpi - For best results
print at the highest resolution onto glossy photo paper.
Design for use with a clear single jewel case.

---------------------------------------------------------

DTS-Audio-CD Info

Front  	
Left Channel SBD: Master Reel -> Master Dat 
Right Channel SBD: Master Reel -> Master Dat  

Center
Mono Mix -5db SBD: Master Reel -> Master Dat
 
Surround
Left Channel -3db FOB: ECM-280 mics > TC-152
Right Channel -3db FOB: ECM-280 mics > TC-152

Sub/LFE
Mono Mix -4db SBD: Master Reel -> Master Dat 

---------------------------------------------------------

Notes

This is all that circulates in the SBD source.

The AUD source was lightly EQ'ed.  A slight high end cut.

The AUD source was a bit overwhelming in the 5.1 mix.  While
I usually leave the levels alone, this time I mixed the AUD
into the rear channels at -3db.   In my experience louder 
rear channels is an undiserable effect.  

AUD Patch Samson approx 4:35 to fill missing part of the SBD
29:58.490 to 31:31.560 total of 01:33.070.  This is somewhat
detectable but hardly.  Which is really a statement to just 
how great the AUD source is.

SBD Patch Drums approx 02:37 to fill missing part of the AUD
44:07.731 to 44:15.904 total of 0:08.172.  This is smooth and
most likely undetectable.

Missing 22.027 crowd on AUD source between Around & Around
and High Time.  SBD trimmed accordingly to match with a 3 
second crossfade.  Smooth and most likely undetectable.

---------------------------------------------------------

More On DTS

Today's audio standards are moving towards multi-channel 
sound, like DTS and Dolby Digital.  While the Audio-CD 
standard (Red Book) hasn't changed to accommodate these 
new sound formats, it is still possible to go around the 
specification and put a 5.1 surround recording on a regular 
Audio-CD.  To play a DTS-Audio-CD you must connect your 
DVD/CD player via a digital cable (optical or coaxial) to 
your DTS Dolby-Digital receiver. It is not 100% sure that 
your receiver will recognize a DTS-Audio CD, so the first 
time you're trying to playback a DTS-Audio-CD you must do 
a test to determine if it can. Begin with the volume very 
low, start the disc and raise the volume gradually. NEVER 
listen to a DTS-Audio-CD through the analog audio outputs 
of your CD/DVD player.

Burning Instructions
Burn them the absolute same way you would burn any normal 
Audio-CD from .shn files.

---------------------------------------------------------